You’re looking at a hole in your wall and wondering how long this is going to take, how much dust you’ll be cleaning up for weeks, and whether the patch will be obvious every time you walk by. Most drywall patching in Northern Liberties, PA gets finished the same day we start—and when we leave, you won’t see the repair.
The difference comes down to proper backing, the right joint compound, and knowing how to feather the edges so the patch blends completely. Your Northern Liberties home probably has texture on the walls, maybe from the ’50s or ’60s when most of these rowhomes went up. Matching that texture takes experience, not guesswork.
You get walls that look right, a space that’s clean when we’re done, and no need to schedule your life around multiple visits. The repair holds because we’re using the proper materials and methods—not spackle that’ll crack again in six months.
Sharpe Drywall exists because homeowners in Northern Liberties and across Philadelphia kept getting the same treatment—contractors who showed up late, left messes, or disappeared halfway through the job. We built this company to do the opposite: show up on time, finish the work properly, and leave your space cleaner than we found it.
Our crews are licensed and insured, and we’ve spent years working on the kind of homes you see throughout Northern Liberties—older construction with unique textures and quirks that require actual knowledge, not YouTube tutorials. You’re not getting a quick fix that falls apart. You’re getting a repair that lasts because we’re doing it right the first time.
We start by assessing the damage to figure out what’s actually needed. Small holes get a different approach than large sections, and if there’s an underlying issue causing cracks to reappear, we’ll tell you before we patch over it and call it done.
Once we know what we’re working with, we prep the area properly—cutting clean edges, adding backing if needed, and making sure the surface is ready for drywall mud. The first coat goes on, then we let it dry. Dry time matters. Rushing this step is why DIY patches end up cracking or looking lumpy.
After the first coat dries, we apply additional coats of joint compound, feather the edges so the repair blends into the surrounding wall, and match your existing texture. Then comes sanding, priming, and finishing with paint if you need it. We use professional-grade vacuums during sanding to control dust, and we clean up completely before we leave—no drywall mud on your floors, no debris in the corner.
Ready to get started?
You’re getting the full process—damage assessment, proper prep work, quality materials, professional installation, texture matching, finishing, and complete cleanup. We’re not cutting corners with spackle on a hole that needs a real patch, and we’re not leaving after the first coat because “it’s good enough.”
Northern Liberties has a mix of historic rowhomes and newer construction, and the approach changes depending on what we’re working with. Older homes often have plaster underneath or textures that take skill to replicate. We’ve worked on enough properties in this neighborhood to know what we’re dealing with before we start.
The price we quote is the price you pay—materials, labor, and cleanup included. No surprise charges when we’re halfway done. You’ll know exactly what the repair costs before we touch your wall, and that number doesn’t change unless you ask us to fix something additional.
Most drywall patching jobs in Northern Liberties, PA get finished in one day, start to finish. That includes prep, multiple coats of joint compound, texture matching, and cleanup. The actual time depends on the size of the damage and how many patches you need done.
Small holes—anything under a few inches—usually take a couple of hours once dry time is factored in. Larger repairs or multiple patches in different rooms will take longer, but we’re still talking about a single visit in most cases. The key is proper dry time between coats. We’re not rushing the process just to get out faster, because that’s how you end up with cracks reappearing in a few months.
If your repair needs prime and paint to match the surrounding wall, that adds time but still gets done the same day unless you’re dealing with a large area that requires multiple paint coats. We’ll give you an accurate time estimate upfront so you know what to expect.
No, not if it’s done right. The whole point of proper drywall patching is making the repair invisible. That means feathering the edges of the joint compound so there’s no ridge or bump, matching the existing texture exactly, and finishing with primer and paint that blends with your wall.
Texture matching is where most DIY attempts and cheap contractors fall short. Northern Liberties homes—especially the older rowhomes from the ’50s and ’60s—often have specific textures that aren’t easy to replicate without experience. We’ve matched enough textures in this neighborhood to know how to get it right.
The other factor is using proper materials and techniques. Spackle might work for tiny nail holes, but anything larger needs real drywall patching with backing and multiple coats of drywall mud. Skipping steps or using the wrong products is why you see obvious patches that stand out every time light hits the wall. We don’t skip steps.
Small holes—think doorknob damage or small punctures—usually just need joint compound applied directly if they’re under half an inch. You clean up the edges, fill with mud, sand smooth, and finish. No backing required because there’s enough surrounding drywall to support the patch.
Large holes are different. Anything bigger than a few inches needs a proper drywall patch with backing behind it. You can’t just fill a big hole with compound and expect it to hold. We cut the damaged section into a clean square or rectangle, add backing material behind the opening, cut a new piece of drywall to fit, secure it to the backing, then apply multiple coats of joint compound over the seams.
The finishing process is the same for both—feather the edges, match texture, prime and paint—but large holes take more time and materials. That’s why pricing varies based on damage size. We’ll assess what you’re dealing with and explain exactly what’s needed before we start.
Yes, texture matching is part of every drywall patching job we do in Northern Liberties. Your repair won’t look right if the texture doesn’t match, and older homes in this neighborhood often have specific textures that require experience to replicate properly.
Common textures we match include knockdown, orange peel, skip trowel, and smooth finishes. Some Northern Liberties rowhomes have plaster walls with textures that were applied decades ago—those take a trained eye and the right tools to match correctly. We’ve worked on enough local properties to recognize what we’re looking at and how to replicate it.
The process involves applying joint compound in a way that mimics the existing pattern, then blending it so you can’t tell where the old wall ends and the new patch begins. This isn’t something you can fake with a spray can from the hardware store. It takes the right consistency of drywall mud, proper technique, and enough experience to know what works.
Pricing depends on the size and number of repairs, but you’re typically looking at $150 to $800 for most residential drywall patching jobs in Northern Liberties, PA. Small holes cost less than large sections that need full patches with backing and extensive finishing work.
We give you transparent pricing upfront—you’ll know exactly what the repair costs before we start, and that price includes materials, labor, texture matching, and complete cleanup. No hidden fees, no surprises halfway through the job. If you’ve got multiple patches that need attention, we’ll assess everything and give you a total cost for the complete project.
The price reflects proper materials and professional work that lasts. You’re not paying for a quick fix with spackle that’ll crack in six months. You’re paying for a repair done right—with the correct backing, multiple coats of joint compound applied properly, perfect texture matching, and finishing that makes the damage disappear. That’s worth more than the cheapest bid you’ll find, and it saves you from paying twice when the cheap repair fails.
Yes, complete cleanup is included with every drywall patching job we do. That means no drywall mud on your floors, no dust covering your furniture, and no debris left in the corner for you to deal with after we leave.
We use professional-grade vacuums during the sanding process to control dust before it spreads throughout your home. Sanding joint compound creates fine dust that gets everywhere if you’re not careful, so we contain it at the source rather than letting it settle on every surface in the room. You shouldn’t need to spend the next week cleaning up after your contractor.
When we’re done, we remove all materials, wipe down surfaces in the work area, and make sure your space looks clean. This is basic respect for your home, but it’s apparently not standard practice based on how many Northern Liberties homeowners tell us about contractors who left their houses a mess. We don’t operate that way. The job isn’t finished until your space is clean and you’re satisfied with the results.
Local Resources
Useful Links
Other Services we provide in Northern Liberties
