You’re not just getting new drywall. You’re getting walls that look factory-smooth, seams you can’t find even when the light hits them wrong, and corners that actually meet at 90 degrees.
No lumps showing through your paint six months later. No callbacks because the tape is bubbling or the mud cracked. Just clean, professional work that makes the rest of your renovation look better by comparison.
Most drywall installation in Sharswood, PA gets finished in a day for standard rooms. You’re not living in a construction zone for weeks. The space is taped off, the work gets done, the cleanup is thorough, and you move on with your project.
Sharpe Drywall works throughout Sharswood and the surrounding Montgomery County area. We’re the crew that gets called in after someone else disappeared mid-job or left walls that looked worse than before they started.
Sharswood has a housing stock that’s mostly pre-1940s construction, which means plaster walls, uneven framing, and settling that creates cracks most installers don’t know how to handle. We do this work every day in older Pennsylvania homes. We know what to expect before we open the wall.
You’ll get a fixed price before we start, licensed and insured contractors doing the work, and a space that’s ready for paint when we leave. No surprises, no excuses, no mess left behind.
We start with a walkthrough and measurements. You’ll get a quote that includes materials, labor, and cleanup—everything it takes to finish the job. If you approve it, we schedule a start date that works for your timeline.
On install day, we protect your floors and furniture, then hang the drywall sheets. Everything gets screwed in tight to the studs—no popped nails six months later. Seams get taped and mudded with multiple coats, sanded smooth between each one.
Once the final coat is dry and sanded, we prime the surface so it’s ready for your painter. Then we clean up completely—vacuum the dust, haul out the scraps, and leave the space ready to move forward. Most residential drywall installation projects in Sharswood, PA wrap up in one to two days depending on the size of the space.
Ready to get started?
You’re getting full-service installation from start to finish. That means hanging, taping, mudding, sanding, and priming. We use mold-resistant drywall in bathrooms, kitchens, and basements where moisture is a concern—standard in older Sharswood homes where plumbing and humidity issues are common.
The average cost to install drywall in Sharswood, PA typically runs between $2.90 and $5.08 per square foot depending on the finish level and room complexity. A standard bedroom usually falls between $1,000 and $1,500 for complete installation. You’ll know your exact number before we start.
We handle texture matching if you’re doing repairs in a textured room—knockdown, orange peel, skip trowel, whatever’s already on your walls. We also coordinate with your other trades if you’re doing a larger renovation. The goal is to make your project easier, not add another layer of scheduling headaches.
Cleanup is part of the job, not an extra. We contain dust with plastic barriers, vacuum as we go, and haul away all scrap material when we’re done.
Most single-room installations finish in one day. A standard bedroom—hanging, taping, mudding, and sanding—takes about 6 to 8 hours of actual work spread across a day or two because the mud needs drying time between coats.
Larger projects like finishing a basement or multiple rooms can take two to four days depending on square footage and how many corners, windows, and doors we’re working around. Older homes in Sharswood sometimes add time if we’re dealing with uneven framing or plaster removal, but we’ll tell you that upfront during the estimate.
The key factor is drying time. We can’t sand the second coat until the first one is fully dry. Rushing that process leads to rough texture and visible seams, which is exactly what you’re hiring us to avoid.
Professional drywall installation in Sharswood, PA typically costs between $1,000 and $3,000 for most residential projects. A 12×12 bedroom usually runs $1,200 to $1,500 installed and finished. Larger spaces like basements or whole-floor renovations can range from $3,000 to $6,000 depending on total square footage.
Cost to install drywall breaks down to about $2.90 to $5.08 per square foot in the Philadelphia area. That includes materials, labor, taping, mudding, sanding, and priming. If you need mold-resistant board for a bathroom or kitchen, that adds about 10% to material costs but it’s worth it in older homes where moisture problems are common.
Repairs are usually priced per patch rather than square footage—most homeowners spend $300 to $800 for typical repair work. You’ll get a fixed price before we start so there’s no confusion about what you’re paying.
You typically don’t need a permit just for hanging drywall in Sharswood, PA. If you’re replacing damaged drywall in an existing room, that’s considered maintenance and doesn’t require permitting.
You do need a permit if you’re changing the structure—adding or removing walls, altering load-bearing framing, or doing electrical or plumbing work behind the drywall. Finishing a basement also usually requires permits because you’re creating new living space.
When permits are required, the drywall work itself still doesn’t need separate permitting, but it does need to meet fire-rating requirements depending on the room. We handle fire-rated drywall installation for garages, furnace rooms, and multi-family buildings where code requires it. If your project needs permits, we’ll tell you during the estimate so you’re not surprised later.
Yes, and this is one of the most common requests we get in Sharswood because so many homes have textured ceilings and walls from the 70s, 80s, and 90s. Matching existing texture takes practice and the right tools—most DIY repairs fail here even when the patch itself is solid.
We can replicate knockdown, orange peel, skip trowel, stomp, and smooth finishes. The process involves applying joint compound or texture spray in the same pattern as the surrounding area, then blending the edges so there’s no visible line where the repair stops.
The hardest part isn’t creating the texture—it’s making it disappear into the existing wall. That requires feathering the edges, matching the depth and spacing of the pattern, and sometimes adjusting based on how the light hits the wall. When it’s done right, you won’t be able to find the repair even if you’re looking for it.
For most rooms, standard 1/2-inch drywall works fine. It’s cost-effective, meets code, and handles normal wear without issues. Ceilings sometimes use 5/8-inch drywall because it resists sagging better over long spans, especially in older homes where joists might be 24 inches on center instead of 16.
Bathrooms, kitchens, laundry rooms, and basements should get mold-resistant drywall—sometimes called green board or purple board depending on the brand. Sharswood’s housing stock is mostly pre-1940s construction, which means older plumbing, less insulation, and more moisture issues than newer homes. Mold-resistant drywall costs slightly more but it’s worth it when you’re dealing with humidity and potential leaks.
Fire-rated drywall is required by code in attached garages and on walls between living spaces and furnace rooms. It’s also smart for multi-family buildings. We’ll recommend the right type based on where we’re installing and what the space is used for. You don’t need to become a drywall expert—that’s what we’re here for.
We do, and it’s included in every job. Drywall creates a lot of dust—sanding joint compound produces fine particles that get everywhere if you don’t contain and clean properly. We use plastic sheeting to seal off work areas, vacuum between sanding passes, and do a final cleanup before we leave.
All scrap drywall, empty mud buckets, used sandpaper, and cutoff pieces get hauled away. We don’t leave materials in your dumpster or expect you to deal with disposal. Floors get swept and vacuumed. Surfaces get wiped down if dust settled on them.
Some drywall contractors in Sharswood, PA consider cleanup optional or charge extra for it. We don’t. Your space should be ready for the next step—whether that’s painting, flooring, or just moving your furniture back in. Leaving a mess behind isn’t professional, and it’s not how we work.
Local Resources
Useful Links
Other Services we provide in Sharswood
