You get walls you can paint the next day. No gaps wide enough to slide a coin through. No dust left behind in your vents or on your furniture. No waiting around for callbacks that never come.
When you’re installing drywall in East Falls, you’re dealing with homes that range from new construction near the Schuylkill to older rowhomes that have settled over decades. That means the installer needs to know how to handle uneven studs, moisture concerns near the river, and the reality that most East Falls homeowners don’t have weeks to wait for a project to wrap.
We handle the full scope—hanging, taping, mudding, sanding, cleanup. You get a quote that doesn’t change halfway through. You get a timeline that actually happens. And you get walls that look like walls should: smooth, clean, ready for whatever comes next.
Sharpe Drywall exists because too many people in Montgomery County and surrounding areas were getting burned by contractors who left messes, missed deadlines, or just disappeared. We saw neighbors dealing with shoddy work and decided to do something about it.
We’re locally owned, fully licensed and insured, and we live in the communities we serve. That means when you call, you’re not getting a call center or a crew passing through town. You’re getting people who care about their reputation here in East Falls and the surrounding Philadelphia area.
We’ve built our business on transparency and follow-through. That’s it. No gimmicks, no upsells, no surprises on the invoice.
First, we measure and assess your space. We look at the framing, check for moisture issues, and confirm what materials you’ll need. You get a fixed-price quote based on square footage and scope—no hourly guessing games.
Next, we hang the drywall. Sheets go up square and tight, with screws set at the right depth so they don’t pop later. Seams are planned to minimize visibility, especially in high-traffic areas or spaces with lots of natural light.
Then comes taping and mudding. We apply joint compound in layers, letting each one dry fully before moving to the next. This is where most shortcuts happen in the industry—we don’t take them. Sanding comes last, and we use dust control methods to keep your home livable during the process.
Finally, we clean up. Every scrap, every dust pile, every piece of trim. You’re left with walls ready for primer, not a construction zone.
Ready to get started?
The cost to install drywall in East Falls typically runs between $1.50 and $3.00 per square foot, depending on the complexity of the job. A standard 12×12 room usually falls in the $400 to $800 range for materials and labor. Larger projects, like finishing a basement or adding walls during a renovation, can run $2,000 to $6,000.
Your quote includes everything: materials, labor, taping, mudding, sanding, and cleanup. We don’t charge extra for moving furniture out of the way or protecting your floors. We don’t tack on fees for “unexpected” studs or corners. The number we give you is the number you pay.
East Falls homes come with their own quirks. Older properties near Ridge Avenue might need extra prep due to settling or plaster removal. Newer builds closer to the river sometimes deal with humidity that affects drying time. We account for these factors upfront, so there’s no sticker shock later.
You also get transparency on timing. Most installations finish in one day for single rooms, two to three days for larger projects. Repairs are often same-day. We’re not here to drag things out—we’re here to get your space back to normal.
The average cost to install drywall in East Falls is between $1.50 and $3.00 per square foot. For a typical room, you’re looking at $400 to $800. Whole-home projects or basement finishes can range from $2,000 to $6,000 depending on size and complexity.
Labor makes up about 70% of that cost. The rest covers materials—drywall sheets, joint compound, tape, screws, and corner bead. If your project involves removing old plaster, repairing water damage, or working around tricky angles, that can add to the total.
We give you a fixed quote upfront based on square footage and scope. That quote doesn’t change unless you change the project. No surprise fees for “extra mud” or “unforeseen corners.” You know what you’re paying before we start.
Most single-room installations are done in one day. Larger projects—like finishing a basement or adding walls during a renovation—usually take two to three days depending on the square footage and how many coats of mud are needed.
Drying time is the main factor. Each coat of joint compound needs to dry fully before the next one goes on. In East Falls, humidity near the Schuylkill can slow that process slightly, especially in summer. We plan for that so your timeline stays realistic.
Repairs are often same-day. A patch job or fixing a few popped nails can be handled in one visit, with touch-up sanding and priming included. We don’t stretch projects out to fill time—we finish and move on.
Yes. Complete cleanup is included with every job. That means all drywall scraps, dust, and debris are removed before we leave. We don’t leave you with a mess to deal with after we’re done.
Sanding creates fine dust that gets everywhere if you’re not careful. We use dust control methods and vacuum as we go. Floors are swept, surfaces are wiped down, and any protective coverings we put down are removed.
You shouldn’t have to spend your weekend cleaning up after your contractor. When we say the job is done, it’s actually done—walls are smooth, space is clean, and you’re ready to paint or move furniture back in.
A good installation has invisible seams. You shouldn’t be able to see where one sheet ends and another begins, even in direct light. Corners should be crisp, screws should be flush but not overdriven, and the surface should feel smooth when you run your hand across it.
A bad installation shows gaps, visible ridges along seams, and popped nails within the first few months. You’ll see cracks form as the house settles because the mud wasn’t applied properly. Corners might be rounded or uneven, and you’ll need frequent touch-ups after normal wear.
The difference comes down to prep and patience. Rushing through taping or skipping a coat of mud to save time creates problems you’ll see for years. We don’t skip steps. That’s why our installations hold up and why you’re not calling us back six months later to fix what should’ve been done right the first time.
Yes, we can match most textures. Whether it’s knockdown, orange peel, or a smooth finish, we’ll blend the repair so it doesn’t stand out from the surrounding wall.
Matching texture takes experience. You need to know how much compound to use, what tools to apply it with, and how long to let it set before knocking it down or smoothing it out. Get any of that wrong and the patch is obvious.
Older East Falls homes sometimes have plaster walls with unique textures that are harder to replicate. In those cases, we’ll walk you through options—whether that’s blending as close as possible or re-texturing a full wall for consistency. Either way, you’ll know what to expect before we start.
We are. We’re fully licensed and insured, which protects you if something goes wrong during the job. That includes liability coverage and worker’s comp for our crew.
Hiring an unlicensed installer might save you money upfront, but it leaves you exposed. If someone gets hurt on your property or if there’s damage during the installation, you could be on the hook. Insurance and licensing aren’t just paperwork—they’re protection.
When you hire Sharpe Drywall, you’re working with a legitimate business that follows the rules and stands behind the work. We’re not a guy with a truck who might be here today and gone tomorrow. We’re accountable, and that matters when you’re letting someone into your home.
Local Resources
Useful Links
Other Services we provide in East Falls
