Most drywall jobs in West Kensington fail because contractors rush the taping and mudding. You end up with seams that show through paint, corners that crack when the house settles, and texture that looks uneven under light. Then you’re repainting within a year or calling someone else to fix it.
Drywall finishing isn’t complicated, but it takes time. The mud needs to cure between coats. Seams need proper feathering. Corners need reinforcement, especially in rowhouses where settling is constant.
When the job’s done right, your walls look smooth under any light. Paint goes on evenly. You’re not dealing with cracks six months later because someone skipped steps to finish faster. That’s what proper drywall installation and finishing gets you—a surface that holds up and looks clean, without the back-and-forth of fixing someone else’s shortcuts.
Sharpe Drywall exists because too many people in West Kensington were dealing with contractors who left messes, missed deadlines, or delivered work that looked fine until the paint dried. We saw neighbors hiring crews who disappeared mid-project or left gaps you could stick coins through.
We’re local, licensed, and we finish what we start. Most of our work comes from referrals—people who hired us once and called us back, or told someone else to. That only happens when you show up on time, quote honestly, and leave the space cleaner than you found it.
West Kensington’s housing stock is mostly rowhouses built decades before drywall existed. That means tying new materials to old plaster, working around settling, and understanding how these homes move. We’ve been doing this long enough to know what works and what doesn’t in these structures.
You call or message us with details about the job. We schedule a time to look at the space, measure, and talk through what you need. You get a fixed price before we start—no surprise fees when we’re halfway through.
Once you’re ready to move forward, we schedule the work. Most drywall finishing jobs in West Kensington wrap up in a day or two, depending on size and how many coats the surface needs. We tape seams, apply mud, let it cure, sand it smooth, and repeat until the surface is level and ready for paint.
When we’re done, we clean up completely. No dust left on your floors, no mud on the trim, no debris in your hallway. You’re left with smooth walls and a timeline that didn’t drag out for weeks. If something needs adjusting, we handle it before we leave—not after you’ve already painted and found a problem.
Ready to get started?
Every drywall finishing job includes taping, mudding, sanding, and cleanup. We use quality joint compound that doesn’t shrink or crack as it dries. Seams get reinforced with tape, corners get beaded or taped depending on the application, and everything gets feathered out so you don’t see lines under paint.
In West Kensington, where 65% of homes are attached rowhouses, we pay extra attention to corners and ceilings. These homes shift and settle constantly, so we reinforce high-stress areas to reduce cracking over time. If you’re dealing with water damage or old plaster repairs, we match textures and blend new drywall into existing surfaces so you can’t tell where the repair happened.
You also get transparent pricing. The quote you receive is what you pay—no upcharges for materials, no extra fees for cleanup, no surprises when the job’s done. We’re licensed and insured, so you’re covered if something goes wrong. And we complete most jobs in one or two visits, so you’re not waiting weeks for your space to be usable again.
Most drywall finishing projects wrap up in one to two days, depending on the size of the area and how many coats the surface needs. Small repairs—patching a hole or fixing a seam—usually finish in a single visit. Larger jobs, like finishing an entire room or multiple rooms, might take two days to allow proper drying time between coats.
The mud needs time to cure before you can sand it and apply the next layer. Rushing this process leads to cracking and uneven surfaces. In West Kensington’s older rowhouses, we sometimes add extra reinforcement to corners and seams because these homes settle over time. That can add a few hours, but it prevents callbacks for cracks that show up months later.
Once the final coat is sanded and smooth, you can prime and paint within 24 hours. We don’t leave the job until the surface is ready for whatever comes next—whether that’s paint, wallpaper, or just leaving it as-is.
Seams crack when the mud wasn’t applied correctly, when it dried too fast, or when the house settled and the seam wasn’t reinforced enough to handle movement. In West Kensington, where most homes are older rowhouses, settling is constant. If the contractor didn’t use enough coats or skipped proper taping, those seams will crack as the structure shifts.
Another common issue is using low-quality joint compound that shrinks as it dries. Cheap mud pulls away from the seam, leaving gaps or cracks that show through paint. Proper drywall taping and mudding means using quality materials, applying multiple thin coats instead of one thick coat, and feathering the edges so the seam blends into the wall.
Temperature and humidity also matter. If the space is too cold or too humid while the mud is drying, it won’t cure properly. We control the environment as much as possible and give each coat enough time to dry before moving to the next step. That’s how you get seams that stay smooth and don’t crack six months later.
Yes, matching existing texture is part of most drywall repair jobs in West Kensington. Whether your walls have a knockdown finish, orange peel, or smooth plaster, we can blend new drywall into the surrounding surface so the repair isn’t visible once it’s painted.
Matching texture takes more time than a standard finish because you’re replicating a specific pattern or style. We look at the existing surface, identify the technique used, and apply the same texture to the repaired area. Once it’s primed and painted, you shouldn’t be able to tell where the repair happened.
Older homes in West Kensington often have plaster walls with unique textures that are harder to replicate. In those cases, we sometimes need to blend a larger area to make the transition seamless. If you’re repairing water damage or large holes, matching the texture is critical—otherwise, the patch stands out and looks unfinished even after paint.
Yes, water damage is one of the most common reasons people call us in West Kensington. Leaks from roofs, pipes, or old plumbing cause stains, warping, and soft spots in drywall. If the damage is caught early, we can sometimes dry out the area and repair the surface. If the drywall is saturated or moldy, we cut out the damaged section and replace it.
Water damage repairs involve more than just patching a hole. We need to make sure the source of the leak is fixed before we start, or the problem will come back. Once the area is dry, we remove any compromised drywall, check for mold or structural issues, and install new material. Then we tape, mud, and finish the surface so it blends with the rest of the wall or ceiling.
In rowhouses, water damage often affects multiple units or spreads through shared walls. If you’re dealing with a leak that impacted a large area, we assess the full extent of the damage before starting repairs. That way, you’re not paying for a patch job that doesn’t address the underlying problem.
Drywall finishing costs depend on the size of the job, the condition of the existing surfaces, and how much prep work is needed. Small repairs—fixing a hole or retaping a seam—usually run a few hundred dollars. Finishing an entire room or multiple rooms costs more, but you get a fixed price upfront so there’s no guessing.
In West Kensington, older homes sometimes need extra prep work. If we’re tying new drywall to old plaster, or if the walls have multiple layers of paint and texture, that adds time. Water damage repairs cost more than standard finishing because we’re cutting out damaged material, checking for mold, and replacing sections before we can start the finishing process.
We don’t charge surprise fees or upcharges once the job starts. The price you agree to is what you pay, including materials, labor, and cleanup. If you want a detailed breakdown, we walk through it during the estimate so you know exactly what you’re paying for and why.
Drywall work creates dust and debris—there’s no way around that. But leaving a mess behind is a choice, not a requirement. Sanding joint compound produces fine dust that gets everywhere if you don’t contain it. Some contractors skip the cleanup step because it takes time, or they assume the homeowner will handle it.
We include complete cleanup with every job because it’s part of finishing the work properly. That means vacuuming dust, wiping down surfaces, and removing all debris before we leave. You shouldn’t need to spend hours cleaning your home after we finish your walls.
In West Kensington’s rowhouses, where spaces are tight and dust can travel through shared walls or vents, controlling the mess matters even more. We use dust barriers when needed and clean as we go, so you’re not dealing with a layer of white powder on everything you own. If we’re working in an occupied home, we treat your space the way we’d want someone to treat ours—carefully and respectfully.
Local Resources
Useful Links
Other Services we provide in West Kensington
