You’re not dealing with another round of sanding or touch-ups after the painter shows up. The walls are smooth, the texture matches perfectly, and there’s no guessing whether it’ll look right once the paint goes on.
Most drywall repairs and finishing jobs wrap up in a day. Larger projects might take two or three, but you’re not waiting weeks for someone to come back and fix what should’ve been done correctly the first time.
The floor stays protected, the dust gets cleaned up, and you’re not left wondering if the estimate you got will match the final bill. That’s what happens when the crew doing the work has been doing drywall finishing in North Delaware, PA long enough to know exactly what each job requires before we start.
Sharpe Drywall has been handling drywall installation and finishing across North Delaware, PA for over a decade. We’re not the crew that shows up, does half the job, and disappears when it gets complicated.
North Delaware homeowners used to have limited options for professional drywall work. You either hired someone who treated small jobs like an inconvenience, or you went with a handyman who didn’t have the right tools or training. We built our business specifically to fill that gap.
If the job involves drywall taping and mudding, texture matching, water damage repair, or getting ceilings ready for paint, we’ve done it hundreds of times. You’re working with people who live and work in this area, and who guarantee the work regardless of how difficult it gets.
First, we look at the job in person or through photos you send. We measure, assess the existing texture if we’re matching it, and give you an accurate estimate. No surprises later.
Once we’re on-site, we protect your floors and furniture before any work starts. Then comes the actual drywall finishing: taping seams, applying joint compound, mudding, sanding, and matching textures. If it’s a repair, we’re cutting out damaged sections, installing new drywall, and blending it so you can’t tell where the old ends and the new begins.
Most repairs finish in one day. Full-room drywall installation and finishing typically takes one to three days depending on size and complexity. When we’re done, we clean up completely—dust, debris, everything. What you’re left with is a surface that’s smooth, ready for primer and paint, and looks exactly how it should.
Ready to get started?
You’re getting the full scope of drywall finishing work. That includes taping all seams with paper or mesh tape, applying multiple coats of joint compound, sanding between coats, and creating a smooth surface ready for paint. If your walls have texture, we match it so the repair blends invisibly with the rest of the room.
North Delaware homes—especially older ones—often have unique textures like knockdown, orange peel, or skip trowel finishes. Matching those textures takes experience and the right tools. We’ve worked on enough homes in this area to handle whatever texture your walls have, and we don’t leave until it matches.
We also handle ceiling repairs, water damage restoration, and full-room installations. If you’re renovating and need new drywall hung, finished, and ready for your painter, we do that too. The goal is always the same: you get walls and ceilings that are smooth, clean, and ready for the next step without needing someone else to come fix our work.
Most drywall repairs and small finishing jobs are done in one day. You’re looking at a few hours for a typical patch or repair, and a full day if we’re finishing an entire room or handling multiple repairs in different areas.
Larger projects—like finishing drywall in a newly renovated basement or repairing significant water damage—can take two to three days. That accounts for the time needed to apply multiple coats of joint compound, let each coat dry properly, sand between coats, and apply texture if needed.
We don’t rush the process just to say we finished fast. Joint compound needs time to dry between coats, or you’ll end up with cracks and an uneven finish. But we also don’t drag jobs out unnecessarily. You’ll know the timeline upfront, and we stick to it.
Yes. Texture matching is one of the most important parts of drywall finishing, and it’s where a lot of contractors fall short. If your walls have knockdown, orange peel, skip trowel, or any other texture, we match it so the repair blends in completely.
We bring the tools and materials needed to replicate your specific texture. That might mean using a hopper gun for spray textures, a trowel for knockdown, or a brush for certain hand-applied finishes. We test the texture on a scrap piece or in an inconspicuous area first to make sure it matches before applying it to the repair.
North Delaware homes have a wide range of wall textures, especially in older properties. We’ve worked on enough of them to know how to handle whatever you’ve got. The goal is that once it’s painted, you won’t be able to tell where the repair was.
Drywall installation is hanging the sheets of drywall on the studs and screwing them into place. Drywall finishing is everything that happens after that: taping the seams, applying joint compound (mudding), sanding, and getting the surface smooth and ready for paint.
Installation is the faster part. Finishing is where the skill comes in, and it’s what determines whether your walls look professional or amateur once they’re painted. A lot of people can hang drywall. Far fewer can finish it properly—especially when it comes to sanding it smooth, matching textures, and making sure there are no visible seams or imperfections.
We handle both, but finishing is where most of the time and expertise goes. If you’re hiring someone just to “throw up some drywall,” you’ll likely need to hire someone else to finish it correctly. We do the entire job from start to finish so you’re not coordinating multiple crews or dealing with one contractor blaming another for poor results.
Drywall finishing typically runs between $2.00 and $3.50 per square foot, depending on the level of finish, texture requirements, and the condition of the existing walls. Small repairs—like fixing a hole or crack—usually cost a few hundred dollars. Finishing an entire room can range from $500 to $2,000 or more depending on size and complexity.
The price depends on what’s involved. A simple patch and sand is less expensive than a full Level 5 finish (the smoothest, highest-quality finish) or matching a complex texture. If there’s water damage or structural issues that need addressing before we can finish the drywall, that adds to the cost.
We give you an accurate estimate upfront based on years of experience measuring and pricing these jobs. The final bill matches the estimate because we account for everything during the initial assessment. You’re not getting hit with surprise charges or vague “additional work” fees after we’ve already started.
Yes. Drywall finishing creates dust—lots of it—especially during sanding. We protect your floors and furniture before we start, and we clean up completely when we’re done.
That means sweeping, vacuuming, wiping down surfaces, and removing all debris and materials from your home. We’re not leaving you with a layer of dust on everything or a pile of scrap drywall in your driveway. The space is clean and ready for painting or whatever comes next.
A lot of homeowners worry about the mess, and that’s fair. Drywall dust gets everywhere if you’re not careful. We’ve done this enough times to know how to contain it, minimize it, and clean it up properly. You shouldn’t have to spend hours cleaning after we leave.
Because one coat won’t give you a smooth, professional finish. Joint compound shrinks as it dries, so the first coat leaves slight depressions along seams and screw holes. The second coat fills those depressions. The third coat fine-tunes everything and creates the smooth surface you need before sanding and painting.
Skipping coats or trying to load on one thick coat leads to cracks, uneven surfaces, and visible seams once the paint goes on. It’s one of the most common mistakes DIYers and inexperienced contractors make. They’re trying to save time, but they end up with a finish that looks bad and doesn’t last.
Each coat needs to dry completely before the next one goes on. Depending on humidity and temperature, that’s usually 12 to 24 hours per coat. We don’t rush it. The extra time spent doing it right means you get walls that are smooth, durable, and ready for a flawless paint job.
Local Resources
Useful Links
Other Services we provide in North Delaware
