You’re not paying for drywall finishing in Hunting Park, PA just to have walls. You’re paying so you don’t have to think about them again.
That means no cracks showing up three months later. No shadows under the paint where the seams weren’t feathered right. No texture that doesn’t match the rest of the room. When the job’s finished, your walls should look like they’ve always been there—smooth, uniform, ready for whatever color you throw at them.
Most drywall problems don’t start with the drywall. They start with shortcuts during finishing. Rushed taping. Thin coats. Sanding that stops just short of actually being level. You don’t see it until the paint goes on, and by then, the crew’s gone.
We handle drywall installation and finishing the way it’s supposed to be done. That includes proper taping and mudding, multiple coats where they’re needed, and sanding that actually creates a flat surface. If you’re repairing a section, we match the texture so you can’t tell where the old wall ends and the new one starts.
Sharpe Drywall has been working in Montgomery and Bucks County for more than ten years. We’re locally owned, fully licensed, and insured. We live in the area, so when you call, you’re talking to someone who knows what Hunting Park homes look like on the inside.
A lot of houses around here are old. Really old. That means you’re dealing with plaster, settlement cracks, and walls that weren’t built with modern materials in mind. Tying new drywall into old surfaces takes more than just slapping up a sheet and calling it done.
We’ve seen what happens when contractors skip steps or use cheap materials. You end up with bubbles, loose tape, and joints that telegraph through the paint. We use premium compounds, mold-resistant board where it makes sense, and techniques that hold up long after we’re gone.
First, we assess what you’re working with. New construction is straightforward. Repairs mean figuring out why the damage happened in the first place—moisture, movement, bad previous work—so it doesn’t come back.
Once the drywall’s up, we tape every seam and corner with the right materials for the job. Then comes the mudding. Most jobs need at least three coats: one to embed the tape, one to build up the joint, and one to feather it out so it disappears. Each coat has to dry completely before the next one goes on. Rushing this is where most problems start.
After the final coat dries, we sand everything smooth. Not just smooth enough—actually smooth. We check with a light held at an angle because that’s how imperfections show up. If there’s texture involved, we match it using the same tools and techniques that created the original finish.
Then we clean up. Completely. Drywall dust gets everywhere, so we don’t leave until it’s gone. Most of our jobs in Hunting Park start and finish in one day. Larger projects might take two. Either way, you’ll know the timeline before we start.
Ready to get started?
Drywall finishing covers everything that happens after the boards go up. That includes taping all seams and corners, applying multiple coats of joint compound, sanding to create a uniform surface, and matching any existing texture if you’re doing a repair.
We offer Level 4 and Level 5 finishes depending on what your project needs. Level 4 is the standard for most homes—smooth enough for flat paint and typical lighting. Level 5 adds a skim coat over the entire surface, which is what you want in high-light areas, with gloss paint, or in open floor plans where walls are more visible. It’s becoming more common in Hunting Park as more homeowners move toward cleaner, modern aesthetics.
If you’re dealing with an older home, there’s a good chance you’ve got texture somewhere—knockdown, orange peel, skip trowel, or something custom from decades ago. We can recreate it. We bring the tools and materials to match what’s already there so repairs blend in.
Everything gets cleaned up when we’re done. Floors, furniture, trim—we cover what needs covering and vacuum what needs vacuuming. You’re not dealing with dust for the next week.
Most drywall finishing projects in Hunting Park, PA are completed in one day. That includes taping, mudding, sanding, and cleanup. Larger jobs or projects that involve extensive texture matching might stretch into a second day, but that’s the exception.
The timeline depends on how many coats are needed and how much drying time is required between them. We don’t rush the drying process because that’s where problems show up later. If you’re getting a Level 5 finish with a full skim coat, expect it to take a bit longer than a standard Level 4.
Repairs are usually faster. Small patches and fixes can often be handled in a single visit, especially if the damage is localized and there’s no underlying issue causing it. We’ll give you a clear timeline before we start so you know exactly what to expect.
Level 4 is the standard finish for most residential projects. It involves taping all joints, applying three coats of compound, and sanding smooth. It’s designed to look good under normal lighting with flat or eggshell paint. You’ll see it in the majority of homes across Hunting Park.
Level 5 adds a skim coat—a thin layer of compound applied over the entire wall surface, not just the seams. This creates a completely uniform texture and eliminates any chance of the joints showing through, even under harsh lighting or with glossy paint. It’s what you want in spaces with lots of windows, open layouts, or anywhere the walls are a focal point.
Level 5 costs more and takes longer, but it’s worth it in the right situations. If you’re unsure which one makes sense for your project, we’ll walk you through it. The goal is to match the finish to how the space will actually be used and lit.
Yes. Texture matching is one of the most common requests we get in Hunting Park, especially in older homes where repairs need to blend into walls that were finished decades ago. Whether it’s knockdown, orange peel, skip trowel, or something custom, we can recreate it.
The process involves identifying the original texture pattern, using the right tools to replicate it, and adjusting the technique until it matches. Sometimes that means using a specific roller, trowel, or spray gun. Other times it’s about the consistency of the mud or the pressure applied. Small details make a big difference.
The hardest part isn’t creating the texture—it’s making sure it blends seamlessly with what’s already there. That’s where experience matters. If the repair is in a high-visibility area, we’ll take extra time to get it right because even a slight mismatch stands out once the paint goes on.
We handle both. Drywall repair is actually a big part of what we do in Hunting Park because so many homes in the area are older and deal with settling, moisture issues, or damage from previous work that wasn’t done right.
Repairs can range from small holes and cracks to entire sections that need to be cut out and replaced. If there’s water damage, we’ll address the source before we patch anything. If it’s a structural crack, we’ll make sure it’s not going to reopen after we finish. Fixing the symptom without addressing the cause just means you’ll be calling someone again in six months.
Once the damaged section is removed and any underlying issues are handled, the process is the same as new installation—tape, mud, sand, texture if needed, and clean up. The goal is to make it look like the damage never happened.
We use standard drywall for most projects, but we’ll recommend moisture-resistant or mold-resistant board in areas like bathrooms, basements, or anywhere water is a concern. Hunting Park has a lot of older homes with older plumbing and insulation, which makes certain areas more vulnerable to moisture over time.
The type of board matters, but the compound and tape matter just as much. We use premium joint compound that’s designed for durability and won’t crack or shrink as it dries. For seams, we use paper tape or fiberglass mesh depending on the application. Paper tape is stronger for most joints. Mesh works better in certain repair situations.
If you’re dealing with a high-traffic area or a space that sees a lot of humidity, we’ll talk through the best materials for the job. The goal is to set you up with a finish that lasts, not one that needs touch-ups a year from now.
Professional drywall finishing in Hunting Park, PA typically runs between $1.50 and $3.50 per square foot, depending on the level of finish, the condition of the space, and whether texture matching is involved. Level 5 finishes cost more than Level 4 because of the additional skim coat and labor.
Repairs are usually priced by the scope of the damage. Small patches and holes typically fall in the $300 to $500 range. Larger repairs involving water damage, multiple sections, or structural issues can run $800 or more. We’ll give you a fixed price upfront so there are no surprises.
What you’re quoted is what you pay. We don’t add fees or upcharges once the job starts. If we find something unexpected—like hidden damage behind a wall—we’ll talk to you about it before moving forward. The goal is transparency from start to finish so you know exactly what you’re getting and what it costs.
Local Resources
Useful Links
Other Services we provide in Hunting Park
