Your walls go up clean, flat, and ready for finishing. No gaps showing through the paint six months later. No callbacks because the seams are cracking or the corners look wavy.
When drywall installation in Rhawnhurst, PA is done right, you don’t think about your walls at all. They’re just there, doing their job, looking the way they should. That’s what proper hanging, taping, and finishing gets you.
Most homes in Rhawnhurst were built in the early 1960s, which means you’re often working with plaster, lath, or older framing that doesn’t always play nice with modern materials. A drywall installer who knows what they’re doing accounts for that. We don’t just slap up sheets and hope for the best.
You get a finished space that’s ready for paint, trim, or whatever comes next. The job gets done in the time we said it would. And when you walk through at the end, the walls look like walls—not a science project.
Sharpe Drywall exists because too many contractors in the Philadelphia area were leaving jobs half-done, overcharging for sloppy work, or just not showing up. We got tired of hearing the same stories from neighbors and decided to do something different.
We’ve been installing and repairing drywall throughout Rhawnhurst, Northeast Philadelphia, and the surrounding areas for over a decade. Every job gets treated the same way—proper materials, clean installation, and respect for your time and your home.
We’re licensed, insured, and local. That means we’re not disappearing after the check clears. If something needs attention, we’re here. And because we live and work in the same communities we serve, our reputation matters more than a single job ever could.
We start with a walkthrough and a free estimate. You show us the space, we measure, discuss any problem areas, and give you a clear quote. No surprises, no upselling once we’re on site.
Once we’re scheduled, we prep the area to protect your floors and furniture. Then we hang the drywall, making sure every sheet is level, secure, and properly fastened. Corner beads go on clean. Seams get taped with quality joint compound, not the bargain stuff that cracks in a year.
After the mud dries, we sand it smooth. If you’re getting texture, we match it to your existing walls so you can’t tell where the old ends and the new begins. Then we clean up completely—no dust piles in the corner, no scraps left behind.
Most installations in Rhawnhurst wrap up in a day or two, depending on the size of the job. You’re left with walls that are ready for primer and paint, and a space that’s back to normal faster than you’d expect.
Ready to get started?
Every drywall installation in Rhawnhurst, PA includes proper hanging, taping, mudding, and finishing. We use mold-resistant drywall in moisture-prone areas like basements and bathrooms—something that matters in a neighborhood where 23% of properties face flood risk over the next 30 years.
You also get texture matching if you’re tying into existing walls. That’s not an upsell. It’s part of doing the job right. We’re not leaving you with a smooth patch in the middle of a knockdown ceiling.
The average cost to install drywall in Philadelphia runs between $1.50 and $3.50 per square foot, depending on the scope and finish level. Our pricing reflects quality materials, proper techniques, and the experience that keeps callbacks to a minimum. We’re not the cheapest option, and that’s intentional. You’re paying for work that lasts and looks right the first time.
We also handle all the cleanup. Drywall dust gets everywhere if you’re not careful, and we are. When we leave, your space is ready for the next step—not a week of vacuuming.
Most drywall installation projects in Rhawnhurst run between $1.50 and $3.50 per square foot, with the Philadelphia area average landing around $2,095 for a typical job. The final cost depends on the size of the space, ceiling height, finish level, and whether you need moisture-resistant materials.
A small bedroom might cost $800 to $1,200 installed and finished. A full basement could run $3,000 to $5,000 depending on the layout and any obstacles like ductwork or utilities. If you’re adding texture or need extensive prep work on older framing, that affects the price too.
We give you a detailed quote upfront so you know exactly what you’re paying for. No line items that magically appear once we’re halfway through the job. The number we give you is the number you pay.
Most single-room drywall installations in Rhawnhurst get finished in one to two days. Hanging the sheets usually takes a few hours. Taping, mudding, and finishing take longer because the joint compound needs time to dry between coats.
If you’re doing a basement or multiple rooms, plan on three to five days from start to finish. That includes drying time, sanding, and cleanup. We don’t rush the mud because that’s how you end up with cracks and visible seams six months later.
Weather and humidity can slow things down slightly, especially in older Rhawnhurst homes without great climate control. But we work around it. You’ll have a clear timeline before we start, and we stick to it unless something truly unexpected comes up.
If you’re just replacing damaged drywall or finishing an interior space that’s already framed, you typically don’t need a permit in Philadelphia. But if you’re adding walls, changing the layout, or doing work that affects structural or electrical systems, you do.
All licensed contractors in Philadelphia are required to carry current insurance on file with the Department of Licenses and Inspections. Most carry at least $1 million in general liability coverage. That protects you if something goes wrong during the job.
We handle permit questions during the estimate. If your project needs one, we’ll walk you through it. If it doesn’t, we’ll explain why. Either way, you’re not guessing or hoping you’re on the right side of city code.
There isn’t one. Sheetrock is a brand name for gypsum drywall, the same way Kleenex is a brand name for tissue. The terms get used interchangeably, and they mean the same thing in practice.
What does matter is the type of drywall being installed. Standard drywall works fine for most interior walls. Moisture-resistant drywall (often called green board or purple board) is better for bathrooms, basements, and kitchens where humidity is higher. Fire-rated drywall is required in some situations, like garage walls adjacent to living spaces.
In Rhawnhurst, where many homes were built in the 1960s and flooding is a growing concern, we recommend moisture-resistant materials in any below-grade or high-risk area. It costs a little more upfront, but it’s a lot cheaper than replacing water-damaged walls in five years.
Yes. Texture matching is part of what we do, and it’s included in the installation. Whether you’ve got knockdown, orange peel, skip trowel, or something custom, we replicate it so the repair blends in completely.
Older homes in Rhawnhurst often have hand-troweled textures or patterns that aren’t standard anymore. Those take more time and skill to match, but it’s doable. We bring samples, test on scrap, and don’t move forward until it looks right.
If your existing texture is in rough shape or inconsistent across the room, we’ll talk through your options. Sometimes it makes more sense to skim coat the whole wall and start fresh. Other times, a spot match works fine. Either way, you won’t be staring at an obvious patch every time you walk by.
Completely. Drywall dust is fine, invasive, and gets into everything if it’s not managed right. We use dust barriers, cover vents, and run air scrubbers on bigger jobs to keep it contained.
After sanding, we vacuum the walls, floors, and any surfaces in the work area. We bag all the scrap material and haul it off. You’re not left with a pile of cutoffs in the driveway or dust on every horizontal surface in your house.
When we’re done, the space is ready for paint or whatever comes next. No extra cleaning on your end. That’s part of doing the job right, and it’s built into every project we take on in Rhawnhurst and the surrounding areas.
Local Resources
Useful Links
Other Services we provide in Rhawnhurst
